Ident 3 Rising Cake

For this scene I used the same environment as scene 2, the walls, floor, center console and the biped.
I made the oven by using boxes and Boolean tool to create a hole in the center console then used boxes for the oven door and oven tray. I used extruded text on the oven and cylinders as knobs with a small sphere as the marker on the knobs, I also added the same map to the oven as the hob has.


I adjusted the pivot point on the door so it would open properly from the bottom when animated,


Text cake:
I created the text, converted it to editable poly and used the extrude tool.
I used the set keys to animate the text and when I wanted the text to rise simulating a cake I used the scale tool to raise the height of the text and used the set keys for the timing, i added a sponge map to the text to make it look abit more like a cake, I got the image from, https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiD0PLVz6ztQjK8QpkewTqEJNCn1rmy3EAEfG02TAZUqMfmUTuhZt3wSSM47CHDCadodjzxaKgMR-zwqM2Vk_Ndk1ejots4P_UW4P3mfL68La8YyYoSjSHLhdKsbcMkS5c11i8ip7E5AOE/s320/spongeCake1.jpg
http://easybakeoven.files.wordpress.com/2007/07/sponge4.jpg



The oven tray was made from a box and I added a map to make It look realistic, the map was from
http://www.dkimages.com/discover/previews/819/374897.JPG
I linked the tray to the text so it would stay with it when it is being lifted out of the oven, I used the set keys to control the movement.


The biped was animated using auto keys to control the movements of his hands,

The camera in this scene does not follow a path, but instead I used the set keys to place the camera and the target of the camera where I wanted them.